Bashan Brozz RECON 250

This page is dedicated to the Bashan RECON Brozz 250 Dual-Sport Enduro. Videos, Photos and docs included. I do not sell these products, but I do provide links! It is purely my opinion based on my experiences.

GET YOURS AT SAVE $50 using MOTOCHEEZ at checkout. or you can call them at 770-662-1898. They are Located in Georgia, tell them MotoCheez sent ya ;) 49 state legal (NOT CA) My impression is better than expected. Fairly easy to assemble and I had no damage during shipping. The memory foam seat and inverted forks makes this the best riding China bike I have ridden to date, it's the quietest and smoothest running. because of counterbalanced engine. Decent quality and comes ready to run out of the box with no mods needed. (Carb, jetting and mods will wake this up).

Brozz RECON 250 info and specs (drop down):

Brozz Recon 250 features:

Digital Dash

5 speed manual Wet clutch

167FMM 15HP zongshen 229cc engine (Honda CG clone)

35" seat height

OEM skidplate

3 gallon fuel tank

Luggage Rack

Inverted Forks

Front and rear Disc brakes

SS Brake Lines Front and Rear

21”F 18”R wheels. 80/100-21 110/100-18 tires Nobby DOT tires

Weighs 320 lbs

Chain 428

Sprockets 17R 46R

Max Speed 70mph

Ground Clearance 12"

Additional Colors: Desert Tan, Army Green, Black Manufactured by Bashan

SPEC Idle Rpm: 1500 Spark Plug: D8TC Spark Plug Gap: 0.6-0.7mm Intake Valve: 0.4-0.6mm Exhaust Valve: 0.5-0.6mm Trans Gear Ratios 1st- 2.909 2nd- 1.867 3rd- 1.389 4th- 1.150 5th- 0.9545 12M7AS-3 Battery

Frequently Asked Questions (FAQ) and Troubleshooting (click dropdown)

Frequently asked questions:

Q: How do I use the CHOKE on the carb?

A: Lever up is ON (choke full on), Choke lever down is OFF (Bike warmed up) and middle is half choke.

Q: My bike idle is too low or too high.

A: The idle adjustment is on the side of the Carb, a knurled thumbscrew, some a flat blade screw. Clockwise raises idle, counter lowers it. Adjust when fully warmed up. Being carbureted the idle will be low when it's cold and you'll have to hold the idle up with your throttle grip. there are NO pre counted turns out to set, must be done while idling

Q: my bike won't run with the choke off, it spits, coughs and stalls.

A: These bikes are LEAN from the factory to meet emissions, Doing the Carb mod like in my Hawk video is the single best improvement you can do for more power and smoother running, see videos.

Q: What main jet should I use in my bike?

A: typically if you are under 5000 feet a 110 main is a good starting point, please watch the videos there is more that should be done.

Q: How do I use the Motocheez discount on TXpowersports website?

A: At checkout, put MOTOCHEEZ in the discount box before you submit payment.

Q: Will you build my bike, or work on it?

A: NO, sorry I do not do side work on bikes, I do not have the time but I will help via messaging on insta and Facebook. I do not give out my number.

Q: Can I register this bike in my state?

A: Most states will register this bike, many will not. Check with your local DMV or check, tell them Cheez sent ya!

Q: What is the top speed of the 250 (229cc) bikes?

A: 62 with no mods, about 70 with all mods.

Q: How can I send you a message?

A: I have Instagram and Motocheez Facebook page (MotoCheez), either one of those I can chat with you on. or email me:

Q: Are you planning any more Hawk rides?

A: YES, if you are interested follow me on Instagram (MotoCheez)

Q: I want to send you a check for ONE MILLION DOLLARS! Do you have a mailing address?

A: YES!! My mailing address is: MotoCheez PO box 908 Wingdale, NY 12594 :)

RECON 250 Video Playlist: Recon Playlist


For the best prices on Brozz250 parts, click the links below!

Nibbi PWK Carb 28mm:

Nibbi air filter:

Nibbi intake manifold:

Nibbi 1/4 turn throttle: tube (needs longer cablle)

Front sprocket 17 tooth, 2 teeth higher than stock for more top end speed

17 tooth front sprocket

Std 130 link chain will fit, no need to remove or add links

**For 428 pitch chain, some newer bikes shipping with larger chain**

Installation video:

Hitch-Mounted Aluminum Motorcycle Carrier - 400 lb. Capacity

Steel Motorcycle Carrier 500 LB Scooter Dirt Bike Hauler Hitch Mount Rack Ramp Anti Tilt Anti Wobble


Feeler gauges

Measures: 0.0015 Inch (0.038 mm) to 0.025 Inch (0.635 mm)
Find TDC First!

Then Adjust

2pcs Black Motorcycles Handguards:

28mm 1 1/8" Fat Handlebar:

Handlebar Risers 1 1/8 inch 28mm or 7/8 inch 22mm Universal:

GUB Universal Phone Mount Bike Holder,Aluminum Alloy Motorcycle Handlebar Cradle

Universal Black Supermoto Front Fender :

MadDog GearComfort Ride Seat Protector:

Motorcycle Chain Lubricator Oiler:

Universal SMD LED Technology Turn Signal Lights:

MYK VM26 30mm Carb Carburetor PZ30 250cc (Mikuni Jets required)

Leaky Gas Cap? Here is the OEM Honda Gas cap that fist your bike. (Honda 17620-460-067)

Performance Spark Plug

PERFORMANCE NGK (6681) DR8EIX Iridium IX Spark Plug

My Leather Kevlar riding gloves motorcycle

Mikuni Jet kit, will fit stock Hawk 250 Carb (NOT for Kiehn)

Mikuni Jet kit, will NOT fit stock Carb:


E3 Spark Plug E3.36 Powersports Spark Plug, PERFORMANCE PLUG

Replacement turn signal flasher

Adjustable good for LED or standard bulbs


NICHE Gold 428 X-Ring Chain 130 Links With Connecting Master Link

**For 428 pitch chain, some newer bikes shipping with larger chain**

Motorcycle LED Bulb Headlight H4, Hawk250, Magician250, Honda, Yamaha, Suzuki

2x Black Anti Vibration Anodized CNC Aluminum Billet 7/8" Handlebar Bar End Slider vibration Cap Plugs

Acerbis HandGuards all colors

motorcycle handgrips

Pro Grip 714 Dual Sport hand Grip DRZ, Hawk, Magician

GUB Universal Phone Mount Bike Holder,Aluminum Alloy Motorcycle Handlebar Cradle

Acarte Carburetor Carbon Dirt Jet Cleaner Tool Kit 10 Cleaning Needles with 5 Brushes

Engine Clutch Friction Plate For CG CB 200cc 250cc

Anker PowerCore II 10000

Buritto Tube - 12" X 3.5" (Burrito tube)

Buritto Tube - 12" X 3.5" (Burrito tube):

MSR Shifter

MSR Folding Shift Lever:

There was a change on the Amazon link that ended

up being the wrong part number (bigger hole) THIS

one should be the proper part!!